We are considered a prominent HDPE Pipes Manufacturer, Exporter and Supplier from India. Our HDPE Pipes are manufactured using High Density Polyethylene that ensures their flawless performance and long functional life. These pipes are quite useful for carrying potable water, slurries, hazardous wastes, wastewater, cables, chemicals and compressed gases as well as oils. Moreover, these are highly demanded for landfill gas extraction and cable ducting.
Smooth inner surface prevents growth of bacteria hence makings pumping easier and faster.
High quality HDPE Pipes are manufactured as per Specification No. IS: 4984/1995 of the Bureau of Indian Standards.
| Specification | STANDARD | Unit | Value | |
| Intensity | ISO 1183 | gr/cm3 | 0,95 | |
| Melting flow rate (MFR) 190/5 | T 003 | gr/10 min | 0,2 – 0,4 | |
| Melting flow rate (MFR) 190/5 | T 005 | gr/10 min | 0,4 – 0,7 | |
Mechanical specifications |
Melting flow rate (MFR) 190/5 | T 010 | gr/10 min | 0,7 – 1,3 |
| Tensile stress (akma) | ISO 527 | Kg/cm2 | 255 | |
| Elongation (creep) | ISO 527 | % | 9 | |
| Elongation (break) | ISO 527 | % | >600 | |
| Modulus of Elasticity | ISO 527 | Kg/cm2 | 11216 | |
Thermal Specifications |
Softening Tempreture | ISO 306 | °C | 77 |
| Deflection Tempreture | ISO 75 | °C | 75 | |
| Coefficient of Thermal Expansion | DIN 53732 | 1 / °C | 0,00018 | |
| Thermal Conductivity (20 oC) | DIN 52612 | W / m°C | 0.4 | |
| Flamibility | DIN 4102 | -- | B2 | |
Electrical Specifications |
Specific Volume Resistance | VDE 0303 | Ohm.cm | >1016 |
| Özgül Yüzey Direnci | VDE 0303 | Ohm | >1013 | |
| Dielectric coefficient | VDE 0303 | kV / mm | 70 |
Polyethylene Pipe, Pe 32 class is developed in 1950 with improving technology and low density. 3rd Generation PE 100 Polyethylene raw materials are used in drinking water pipelines, desalination plants, biological treatment plants, swimming pool piping, sea discharge lines, gravity flow water lines, gas stations , irrigation lines, compressed air lines, cooling-heating lines, pre-insulated sheathing for pipes. Because Low Density Polyethylene Pipe is economical and has high-performance in many areas, such as sewer lines has been a solution. (C2H4) has the general formula of crude oil of 97% polyethylene and is a thermoplastic polymer as shown. The production of raw materials, entirely depends on the availability and price of crude oil. Polyethylene density is divided into three main groups according to their crystalline structure percent.
• Low density polyethylene raw material (LDPE)
• Medium density polyethylene raw materials (MDPE)
• High density polyethylene raw materials (HDPE)
 |
 |
 |
According to other types of raw materials as well as their field of high performance and long life due to the strength of economy most preferably 97% of the product which is used crude for the production of the polyethylene raw material. So the production of polyethylene raw materials, the availability and the price depends entirely on crude oil. It also has many superior properties compared to other thermoplastic polyethylene. The main ones are
* HDPE Pipe is resistant to weather conditions
* HDPE Pipe High resistance to tearing and pressure
* HDPE Pipe Despite high resistance to stress cracking
* HDPE Polyethylene Pipe -30 And -60 degree to strength
* High Density Polyethylene Pipe have corrosion resistance
* Easy and reliable assembly of HDPE Pipe
* In HDPE Pipes Lower level compared to metal pipe friction losses
* HDPE Pipes, Reduced flow noise
* Electrical full insulation, it is a good thermal insulation
* HDPE Pipes are non toxic.
* HDPE Pipe is suitable for radioactive waste.